How to Clean Your Wooden Chairs Perfectly

Wooden chairs never go out of style.

Whether you’re trying to clean your existing furniture, or hoping to restore a beautiful, old chair you found at an antique store, cleaning wood requires certain tools and delicate materials to maintain the finish and grain.

With the right cleaning supplies, technique, and finishing coat, your wooden chair will be sparkling and catching eyes in no time.

We suggest you to carefully read the following points so that you can keep your wooden chairs new and shining for as long as you can.

Here are the 9 detailed points to you can use to clean your wooden chairs perfectly.

1. Avoid harsh chemicals.

Wooden furniture is either raw, untouched wood, or wood coated with stain or varnish. Either of these can be very easily damaged by chemical cleaners or strong detergents.

Avoid using any drying cleaner or one not specifically intended for wood to avoid doing damage to the raw wood or the furniture’s varnish.

Even cleaners claiming to be made for wood can be too harsh.  Know and avoid anything which are intense cleaning agents such as sulphates.

Pro tip.

Although safer alternatives might not lather, you do not need a lather in order to thoroughly clean.

2. Use cleansing oils.

One of the easiest ways to clean wood is to use an oil-based cleaner.

Water-based cleaners can be too strong, while oil-based cleaners simultaneously cleanse the wood while infusing it with a conditioning treatment.

The most common oil is mineral, but you can also use a vegetable oil-based treatment.

This can be picked up at most home improvement stores.

Pro tip.

When searching for a cleaner, choose one with mineral spirits containing a conditioning oil as well as a gentle stripping agent.

3. Search for wood-specific cleaner.

Try to avoid using all-purpose cleaners, as these are not formulated for delicate materials.

Instead, use a cleaning solution created specifically for use on wood. This could be a store-bought cleaner, or you can make your own using an oil soap.

Pro tip

Oil Soap is one formula intended for wood, and is typically mild enough to clean without doing damage.

4. Use lint-free rags.

To avoid snagging on any loose strips of wood or leaving lint behind, use lint-free rags for cleaning, such as those made with microfiber. These allow you to clean the wood thoroughly, leaving a streak-free, lint-free finish.

Pro tip.

Cheesecloth can also be helpful in cleaning wood, as it is extremely porous, but picks up dust well and does not leave any fabric behind.

5. 3 Steps to Cleaning.

a. Dust the surface lightly.

Before using a cleaning/polishing cream, lightly dust off the surface using a feather duster or a clean, dry rag or vacuum.

This does not have to be an involved task, but a simple brush-down of the visible surface.

Failing to dust the furniture first could result in pressing dust further into the wood grain. Always do a small dusting before you do any deep cleaning.

b. Apply the cleaner to your rag.

Apply your cleaner to your rag – not directly onto the wood. Applying cleaner to the wood can eat away some of the finish or leave a stain, while applying it to the rag first will ensure you apply the cleaner evenly.

This is true of all cleaners except vinegar and water. If using vinegar and water, you must submerge your rag in the mixture and wring it out until damp i.e., not dripping wet.

EXPERT TIP

 Do a spot test to make sure your cleaner is safe for the furniture.

c. Choose and test your cleaner

It may be a mixture of warm water and a couple of drops of dish soap.

Then, dip a cotton ball in the solution you’re trying and wipe across a small area of the furniture, then dry it with a microfiber cloth.

If there’s no damage, clean the rest of the furniture with a soft cloth dampened with the cleaning solution, and wipe it away gently.

6. 5 Steps for Finishing

a. Drying

Finish by drying the area with your microfiber cloth.

b. Stroking and wiping correctly.

Swipe the wood in long, clean strokes. To make sure the cleaner is applied well, swipe your rag over the wood in long strokes, keeping the weight of your hand consistent. Once you’ve gone over every portion of the wood, go back one more time, using a wiping motion.

c. Time factor.

The length of time will depend on the cleaner, but most cleaners require you to leave it on the wood for 10-20 minutes before moving on to the next step.

d. The Direction of Strokes while Cleaning.

Try to work with the grain of the wood, instead of against it. This will help prevent splinters and apply an uneven coat.

 e. Remnants.

Wipe up any remaining cleanser.

Glance over the surface of the wood to find any stray and excess wood cleaner, and wipe it away to prevent streaking or damaging the wood or varnish.

If not done this will catch dirt.

Excess remnants may bleach the paint or varnish and dis-figure the finish.

Once again, use a lint-free rag if possible to avoid leaving behind bits of fabric.

This step is particularly important if you are using an oil-based cleaner, as leftover oil can cause staining.

7.Sealing Your Work

a. Allow the chair to dry.

Allow your chair to dry after wiping it down. This should only take between 10 and 20 minutes. To speed the drying time, you can place a fan overhead or beside the chair and turn it on high.

Pro tip.

If you are using a water-based cleaner, do not leave standing water on the wood to dry. Instead, wipe up any remaining water with a clean rag.

b. Conditioning.

To seal the wood, apply wood butter. This will not only prevent staining, but will make future cleaning endeavors far easier, as most dirt and grime will slide right off of the conditioned wood.

There are many commercial waxes and wood butters available on the market.

Pro tip.

You can make your own wood butter with some vegetable oil (olive and coconut work well) and beeswax.

To make sure your chair stays in excellent working order, reseal using your wood butter every couple of months. This will make sure the chair is protected from dust and moisture, and will keep the appearance of the wood smooth and supple.

 Maintenance application does not have to be an all-over application. You can search for areas of the chair that have worn down or tarnished and apply your wood butter to those areas alone.

8. Regular maintenance

If you follow a regular maintenance routine, you’ll face fewer problems in future. The finish on your furniture will stay intact, making it look new.

Scrape away any debris using a dough scraper, as most wood cleaners are meant to clean dust and other small sources of disrepair, not caked-on matter, i.e., dust or dirt accumulated over time forming a visible lump/debris on the surface.

ProTip.

If you do have an instructions manual from your furniture seller or manufacturer, follow the instructions to the letter.

9. Warning

If you accidentally begin to strip the varnish from your furniture, stop immediately.

Repairing a small patch is far easier than trying to re-stain an entire piece of furniture.

Pro tip.

If you are using a heavily scented cleaner, be sure to clean in a well-ventilated area.

Çlean carefully not to make a mess of cleaning and end up damaging.

We hope these 9 points let you take the best care of your wooden chairs. Let us know if you face any challenges while following these 9 points. We’d want to answer further questions from you.